Prosonic DVR Informations techniques télécharger pdf (Page 19)

Digital Video Recorder

Chapter IIII. Basic Operation

4.1 Turn on

Check whether the current and voltage of power supply accord with the digital video recorder before turning it on. Check

whether video recording device is connected and whether the connection is proper. Check whether monitor is connected to

VOUT port or VGA port on rear panel. Connect properly and then turn on the recorder. Press Power button on front panel to

turn on the recorder.

 Note: If “No hard disk. Continue?” is displayed when you turn on the recorder; it indicates that the hard disk hasn’t been

installed. Please check whether the hard disk is connected properly, or whether is damaged. If the recording scene isn’t

displayed on the screen, please check the connection of video input device.

 Note: If the hard disk has been used and “Hard disk hasn’t been formatted. Format now?” is displayed; click “Yes” to

format the hard disk and then you can record video normally. Click “No”, the hard disk won’t be formatted and you can’t record

video normally.

4.2 Date/time setting

You need to set date/time before record video.

 Prompt: Stop the video recording when set date/time. If it is in recording state, the status bar will indicate the state and the

settings won’t take effect.

Step 1 Press [Menu] key to enter system menu. If password protection is enabled, the “Input PSW” window will

popup when you press [Menu] key and you need to enter valid password. (Default password: 88888888) If password protection

is disabled, you can press [Menu] key to enter menu setting interface directly.

Step 2 Press [↑], [↓], [←], and [→] to move cursor. Select “BaseSet ” to enter the menu and then select “Date/time

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 91 92

Pas de commentaire

Prosonic DVR Informations techniques Page 19