Prosonic DVR Informations techniques télécharger pdf (Page 27)

Digital Video Recorder

Move cursor to “Select image” to select the image to set mask. Press [Menu] to confirm.

Step 2: Set mask area

Enter mask setting interface. Press [Menu] key to select “Mask alarm” to activate Area button. Move cursor to “Area” and

press [Menu] to enter mask area setting interface, as shown below:

In mask area setting interface, red line is used as the direction line of area selection. Press the same direction to zoom in

the area and press the opposite direction to zoom out the area. You can customize the settings. (One image can cover one area

only) Press [Menu] o return to “Image setting” interface after setting.

 Note: Only two mask areas are supported at present.

Step 3: Copy channel

You may copy the contents of area mask setting to another channel or all channels. Select a channel in “Copy setting to”

and click "Copy” button. Repeat step 1 and 2 if the areas of other channels are different.

Step 4: Save

After the area mask setting of all channels, click “OK” button in “Image setting” menu to save and exit.

5.2.2 Image mask setting

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 91 92

Pas de commentaire

Prosonic DVR Informations techniques Page 27