Digital Video Recorder
○3 To set the “step length”, i.e. the moving speed from preset point to another;
○
4
Click “Auto Cruise” to set cruising path;
○
5
Select “Cruising Point” and check “Enable cruising function of the screen” and “Enable this cruising
point”;
○
6
Input the preset point corresponding to the cruising point at the “Preset Point Number”;
○
7
Input the stay time of the cruising point at the “Cruising Time”;
To set more cruising points, repeat step 5 to 7. Click OK to save the settings.
Load auto cruise
Under non-menu status, press the “PTZ” button at the front panel and input the channel number, and then
press the “Auto” button, the PTZ will auto cruise each cruising point according to the settings in “Auto Cruise”.
5.7.3 PTZ Lens Control
This device has a group of buttons to control PTZ lens, including: PTZ control, direction buttons, Iris+,
Iris-, Zoom+, Zoom-, Focus+ and Focus-. When decoder or speed dome is correctly connected, the following
method can be adopted to control the PTZ and lens. Please refer to below picture for different front panel:
Prompt: 1. Power Switch 2.. Indicate Light 3. Numerical Key 4. State Indicator 5. Infrared Receiver 6. Menu key and Direction
Key 7. USB Interface
Commentaires sur ces manuels