Prosonic DVR Manuel d'utilisateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 68
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
- 6 -
0. Quick Reference to Start this DVR and Change Notice
Please Refer to the Manual inside the CD for details, the hard
copy is only for reference
Before Turning On The System
Please install SATA HDD in the Hard Disk Tray. (Chapter 3.2 and Appendix B)
Please refer to Chapter 3 for all connections.
To use the remote controller (Chapter 2.3)
After Turning On The System
Please wait for about 40 seconds for the system to start up.
Please login the system (Chapter 4), and then physically format the HDDs (Chapter
4.3). (Please note that the HDDs cannot be used for recording if they are not
formatted yet.)
Please refer to Chapter 4 for all basic operations.
Please refer to Chapter 5.2 to setup the system correctly, esp. for NTSC/PAL, Record
Resolution, Time & Language.
Please refer to Chapter 4.4 and Chapter 5.3 for recording setting.
Please refer to Chapter 4.5, Chapter 4.6, Chapter 4.7 to search, playback, and archive the
recorded video/audio.
Please refer to Chapter 5.4.6/5.4.8 for motion Detection, Chapter 5.4.7 for Privacy
Mask(Mosaic), and Chapter 5.6 for Alarm setting
Please refer to Chapter 3.3 for PTZ camera connection, Chapter 4.8 and Chapter 5.4 to
set up and control the PTZ cameras correctly.
Please refer to Chapter 5.5 for Network Setting including DHCP/Static IP/PPPoE, ports no.,
DDNS and E-mail Server
Please refer to Chapter 6 for remote access via internet or intranet from PC/Laptop
Please refer to Chapter 7 for remote access via internet or intranet from mobile phone
Please refer to Appendix A for the estimated recording time.
Please refer to Appendix B and Appendix C for the compatible HDD/USB portable DVD
Burner List
Login/Logout The System
Logout : MENU(Setting) SAVELogout
Login: Power on or after Logout
Setup The System
Format HDD : MENU(Setting) <Maintenance> → <HDD Manage>→Click>>
Formattingto start HDD format..
Change Language, Time, NTSC/PAL, Record Resolution, Password, User Auority :
MENU(Setting) <System>
Setup PTZ: MENU(Setting) <Camera>
Setup Network: MENU(Setting) <Net> <Network> Static IP/DHCP, or MENU(Setting)
<Net> <Next Page> for PPPoE/DDNS
Change Network Port: MENU(Setting) <Net> <Network> for Http/Command/Media
Ports, MENU(Setting) <Net> <Next Page> for Mobile Port
Set up E-mail Server: MENU(Setting) <Net> <Network> <Next Page><Next
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 67 68

Commentaires sur ces manuels

Pas de commentaire