Prosonic DVR Informations techniques télécharger pdf (Page 41)

Digital Video Recorder

Address ID Enter the address of the decoder connected to selected image and then you can switch the images and select

the pan/tilt to operate.

Step Control the rotation of lens. Bigger step indicates faster rotation of lens.

Preset point setting Set and save the position, focus, aperture and zoom of the camera and mark the setting with a

number.

Copy Copy the decoder setting of this channel to another channel.

Central control keyboard Available options are: L.C, PINERVE, SAMLINK and ZHIMIN.

 Prompt: Select central control keyboard protocol if central control keyboard is connected to serial port device.

Add Card ID This function is mainly used in ATM. Activate this function, the account of every business on the ATM

will be recorded (optional).

5.7.1 Auto Cruise

The device has two serial ports, one is RS-232, usually used for connecting close range serial

communication devices. Standard serial port, for example, is used for adding card ID, etc.

The other one is RS-485 standard serial port, with various standard protocols built in. It can be used for

speed dome camera, 485 decoder and centralized control keyboard, etc.

5.7.2 PTZ Lens and Adjusting Dome Camera Setting

Serial port: select 485 serial port

Bit rate: select one from 19200, 9600, 4800, 2400 or 1200, which should be consistent with the

communication bit rate of the decoder or uniform speed dome camera. Note: the above parameters are for

settings of all decoders, same parameters must be selected.

Equipment: select decoder

Channel selection: select the corresponding channel of the DVR controlled by the decoder, or it will lead

to failure of control.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 91 92

Pas de commentaire

Prosonic DVR Informations techniques Page 41