Prosonic DVR Informations techniques télécharger pdf (Page 32)

Digital Video Recorder

In the video scene of this channel, you need to define which area will be processed if motion detection occurs. The whole

image is divided into 48 (6×8) panes. Three colors are available for cursor to set motion detection: yellow indicates moving

cursor only; blue indicates setting motion detection area and the panes that blue cursor moves across will turn into red,

indicating that these areas are selected; green indicates deleting motion detection area and the panes that green cursor moves

across will turn into grey, indicating that these areas are not selected. Press [Menu] key o switch the color of cursor among

yellow, blue and green. Press [↑], [↓], [←], and [→] to move cursor to select area. If the color changes at selected areas, motion

detection will be triggered. If the color change at areas that are not selected, motion detection won’t be triggered. As shown in

the figure below: motion detection will be triggered in area A (red) instead of area B (grey). After selection, press “0” to exit.

Step 5: Process motion detection alarm

Move cursor to “Process” button of motion detection and press [Menu] to enter “Motion detection processing” interface.

The interface of motion detection processing is same to video mask interface. (See Chapter 5.2.3: Alarm processing setting on

page 21.)

Step 6: Select type

The recording of motion detection will be saved as alarm/common recording. In common recording process: when the

setting of time period takes effect, it will be activated immediately after exit the menu; if alerting is activated, common motion

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 91 92

Pas de commentaire

Prosonic DVR Informations techniques Page 32